Fits Vans 470-499 cm long

The Hybrid UV Protect is the top model among Walser's year-round hail protection covers. This car cover protects the hood, windshield, side windows, roof and rear hatch of your vehicle from very heavy hail up to a diameter of 26.2 mm at an impact speed of 70 km/h. Thanks to the six-layer design and high-quality materials, the Hybrid UV Protect is also fully waterproof and UV-resistant, making the cover suitable for permanent outdoor use. In a 500-hour weathering test the Hybrid UV Protect withstood annual UV exposure without problems. The outer layer is made of a 3-layer waterproof UV-protection membrane. The intermediate layer for hail absorption is a hybrid foam layer consisting of 4 mm soft damping foam and an underlying 3 mm hard protective layer against perforation. The hail protection cover is lined on the inside with a paint-friendly lining. Integrated ventilation openings help reduce condensation under the hail protection cover, while reflectors and white piping increase the visibility of your parked vehicle. The car cover is easy to install. Pull the hail protection cover over the car so that the sewn-in arrow points forward. The elastic seams at the lower edge keep the cover taut. Then clip the buckles of the tie-down straps under the vehicle and tighten the straps. The Hybrid UV Protect is available in various sizes and has been tested by TÜV Austria.

Because the Hybrid UV Protect hail protection cover is fully waterproof and UV-resistant, it can remain on the vehicle for extended periods. However, over time condensation may accumulate under the car cover. It is therefore recommended to remove the cover from the vehicle every two weeks to air and dry it.

Product features:

• Top model year-round hail protection cover
• Protects against hail, rain, ice and snow as well as contamination from dust, leaves and bird droppings.
• Fully waterproof and UV-resistant - suitable for permanent outdoor use
• Protects hood, windshield, side windows, roof and rear hatch
• Laboratory tested: Protects against hail up to 26.2 mm diameter at an impact speed of 70 km/h
• Made from high-quality materials
• Six-layer design with a total thickness of approx. 8 mm
• Outer layer: 3-layer, waterproof UV-protection membrane
• Intermediate layer: hybrid foam layer of 4 mm soft damping foam + 3 mm hard protective layer against perforation
• Inner layer: paint-friendly lining
• Integrated ventilation openings to reduce condensation under the cover
• With reflectors and white piping for better visibility
• Easy installation thanks to elastic seams and integrated tie-down straps
• Weathering tested for 500 hours: effortlessly withstands annual UV exposure
• Tested by TÜV Austria
• Includes storage bag

Note:
- This car cover is suitable for long-term use. However, over time condensation may form under the cover. Therefore it is recommended to remove the cover from the vehicle every two weeks so it can air out and dry.
- Not compatible with bike racks or roof boxes.